How to clean bike helmet straps? If you are not careful about the cleanliness and upkeep of your helmet, it will get smelly and dirty over time. And a time will come when you won’t even want to wear the helmet.
Skipping the helmet while going on a bike ride is not a great idea and it will definitely put your life in danger. So, it is imperative that you take some time every week to rinse and clean your helmet, especially the straps and the inner pads so that you can get all the sweat and smell out of the helmet. This will also keep your head safe from infections.
But the question is how to clean up the helmet straps. Continue reading this article to read a detailed guide!
Contents
How To Clean Bike Helmet Straps Guide
It is not like you can put your entire helmet inside a washing machine to clean it up. This little endeavor will not only damage your helmet but also cause irreparable damage to your machine. However, don’t lose hope because there are certain other subtle ways to do so without involving a washing machine.
So, if you want to know more about it then keep on reading this entire article till the very end to get a full and clear picture of what you need to do to ensure proper cleanup and zero damage to the helmet.
Steps To Clean Bike Helmet Straps
Step# 01. Remove the straps from helmet
First of all you need to remove the straps from the helmet so that you can work on them without any hindrance.
Step# 02. Take a toothbrush
Take a toothbrush and brush all the solid salt off the straps. Make sure that you move in the direction of the thread lines.
Step# 03. Add Mild Detergent
Add a small amount of mild detergent to lukewarm water and soak the straps inside this water for a few minutes.
Step# 04. Brush the straps
Now take out the straps and use a toothbrush to get all that dirt off the straps.
Step# 05. Rinse the straps with fresh water
Then rinse the straps with fresh tap water to get all the dirt and soapy water out.
Step# 06. Wring out the straps
Wring out the straps and let them dry out completely before reattaching them to the helmet.
Also read a detailed guide on cleaning non removable helmet liner
Final Thoughts about Helmet Straps Cleaning
So, this was all from my side. I hope you found all this information very useful and easy to follow. I did my best to explain all the steps in the simplest words possible. In the end, I would like to conclude this discussion with a small warning: Do not put your helmet inside a dryer or a washing machine directly. It will damage your machine as well as the helmet.
Plus, always make sure that you remove the straps from the helmet before you proceed with the clean-up process. If the straps are not detachable then at least remove the helmet pads to avoid getting them wet.
Hi, This is Catharine Pendrel, a professional cyclist and founder of Bikeoure. I have been riding bikes for more than 23 years and writing about cycling and other outdoor magazines for about 5 years. Mountain biking has been my passion ever since I first came across it a decade ago. I participated in various MTB tournaments and won numerous mountain trail races.
I started Bikeoure to share my expertise and cycling experience with cyclists all around the world to make them addicted to cycling. My cycling and solo traveling expertise help new cyclists find the best and latest gear in the market for their cycling adventures.